Установка Docker в Linux

Содержание
Введение
Ubuntu: скрипт
Ubuntu: systemctl
Настройка после установки
Удаление старых версий
CentOS
Скрипт
Похожие статьи

Введение

В Linux есть нативная поддержка Docker, поэтому установка довольно прямолинейна.

Про установку Docker в Windows читайте здесь

Ubuntu

sudo apt -y update sudo apt install -y ca-certificates curl gnupg lsb-release sudo mkdir -m 0755 -p /etc/apt/keyrings curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null sudo apt install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin

С помощью скрипта

Скачаем и установим Docker с помощью скрипта

Изучить скрипт можно перейдя на get.docker.com

wget -qO- https://get.docker.com/ | sh

# Executing docker install script, commit: 26ff363bcf3b3f5a00498ac43694bf1c7d9ce16c + sudo -E sh -c apt-get update -qq >/dev/null + sudo -E sh -c DEBIAN_FRONTEND=noninteractive apt-get install -y -qq apt-transport-https ca-certificates curl >/dev/null + sudo -E sh -c curl -fsSL "https://download.docker.com/linux/ubuntu/gpg" | apt-key add -qq - >/dev/null Warning: apt-key output should not be parsed (stdout is not a terminal) + sudo -E sh -c echo "deb [arch=amd64] https://download.docker.com/linux/ubuntu focal stable" > /etc/apt/sources.list.d/docker.list + sudo -E sh -c apt-get update -qq >/dev/null + [ -n ] + sudo -E sh -c apt-get install -y -qq --no-install-recommends docker-ce >/dev/null + sudo -E sh -c docker version Client: Docker Engine - Community Version: 19.03.12 API version: 1.40 Go version: go1.13.10 Git commit: 48a66213fe Built: Mon Jun 22 15:45:44 2020 OS/Arch: linux/amd64 Experimental: false Server: Docker Engine - Community Engine: Version: 19.03.12 API version: 1.40 (minimum version 1.12) Go version: go1.13.10 Git commit: 48a66213fe Built: Mon Jun 22 15:44:15 2020 OS/Arch: linux/amd64 Experimental: false containerd: Version: 1.2.13 GitCommit: 7ad184331fa3e55e52b890ea95e65ba581ae3429 runc: Version: 1.0.0-rc10 GitCommit: dc9208a3303feef5b3839f4323d9beb36df0a9dd docker-init: Version: 0.18.0 GitCommit: fec3683 If you would like to use Docker as a non-root user, you should now consider adding your user to the "docker" group with something like: sudo usermod -aG docker andrei Remember that you will have to log out and back in for this to take effect! WARNING: Adding a user to the "docker" group will grant the ability to run containers which can be used to obtain root privileges on the docker host. Refer to https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface for more information.

docker --version

Docker version 20.10.3, build 48d30b5

РЕКЛАМА от Яндекса. Может быть недоступна в вашем регионе

Конец рекламы. Если там пусто считайте это рекламой моей телеги

systemctl

Может потребоваться установка свежего containerd

sudo apt -y install containerd

Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: runc The following packages will be REMOVED: containerd.io docker-ce The following NEW packages will be installed: containerd runc 0 upgraded, 2 newly installed, 2 to remove and 0 not upgraded. Need to get 36.9 MB of archives. After this operation, 45.6 MB disk space will be freed. Get:1 http://fi.archive.ubuntu.com/ubuntu focal-updates/main amd64 runc amd64 1.1.0-0ubuntu1~20.04.1 [3,892 kB] Get:2 http://fi.archive.ubuntu.com/ubuntu focal-updates/main amd64 containerd amd64 1.5.9-0ubuntu1~20.04.4 [33.0 MB] Fetched 36.9 MB in 5s (7,316 kB/s) (Reading database ... 254483 files and directories currently installed.) Removing docker-ce (5:20.10.18~3-0~ubuntu-focal) ... Warning: Stopping docker.service, but it can still be activated by: docker.socket Removing containerd.io (1.6.8-1) ... Selecting previously unselected package runc. (Reading database ... 254461 files and directories currently installed.) Preparing to unpack .../runc_1.1.0-0ubuntu1~20.04.1_amd64.deb ... Unpacking runc (1.1.0-0ubuntu1~20.04.1) ... Selecting previously unselected package containerd. Preparing to unpack .../containerd_1.5.9-0ubuntu1~20.04.4_amd64.deb ... Unpacking containerd (1.5.9-0ubuntu1~20.04.4) ... Setting up runc (1.1.0-0ubuntu1~20.04.1) ... Setting up containerd (1.5.9-0ubuntu1~20.04.4) ... Processing triggers for man-db (2.9.1-1) ...

sudo apt install -y docker.io

sudo systemctl enable --now docker

Добавьте своего пользователя в группу docker. Замените YOUR_USERNAME на ваше имя пользователя.

sudo usermod -aG docker YOUR_USERNAME

Перелогинтесь

docker --version

Все способы установки Docker на Ubuntu перечислены на docs.docker.com/engine/install/ubuntu/

Настройка после установки

Управляйте Docker от имени пользователя без полномочий root

Демон Docker привязывается к сокету Unix вместо TCP-порта. По умолчанию этот сокет Unix принадлежит пользователю root, и другие пользователи могут получить к нему доступ только с помощью sudo .

Демон Docker всегда запускается от имени пользователя root.

Если вы не хотите постоянно писать sudo docker, создайте группу docker и добавьте в нее пользователей .

Когда демон Docker запускается, он создает сокет Unix, доступный членам группы docker.

Warning:

The docker group grants privileges equivalent to the root user. For details on how this impacts security in your system, see Docker Daemon Attack Surface.

Note:

To run Docker without root privileges, see Run the Docker daemon as a non-root user (Rootless mode).

Создайте группу docker.

sudo groupadd docker

Добавьте текущего пользователя в группу docker.

sudo usermod -aG docker $USER

Выйдите из системы и войдите снова, чтобы ваше членство в группе было пересмотрено.

При тестировании на виртуальной машине может потребоваться перезагрузить виртуальную машину, чтобы изменения вступили в силу.

На десктопной версии Линукс , например X Windows , полностью выйдите из сеанса, а затем войдите снова.

В Linux вы также можете запустить следующую команду, чтобы активировать изменения в группах:

newgrp docker

Убедитесь, что вы можете запускать команды docker без sudo..

docker run hello-world

Эта команда загружает тестовый образ и запускает его в контейнере. Когда контейнер запускается, он печатает сообщение и завершает работу.

Если вы изначально запускали команды Docker CLI с помощью sudo перед добавлением пользователя в группу docker, вы можете увидеть следующую ошибку, которая указывает на то, что ваш каталог ~/.docker/ был создан с неправильными разрешениями из-за команд sudo.

WARNING: Error loading config file: /home/user/.docker/config.json - stat /home/user/.docker/config.json: permission denied

To fix this problem, either remove the ~/.docker/ directory (it is recreated automatically, but any custom settings are lost), or change its ownership and permissions using the following commands:

sudo chown "$USER":"$USER" /home/"$USER"/.docker -R

sudo chmod g+rwx "$HOME/.docker" -R

Configure Docker to start on boot

Most current Linux distributions ( RHEL, CentOS, Fedora, Debian , Ubuntu 16.04 and higher) use systemd to manage which services start when the system boots. On Debian and Ubuntu, the Docker service is configured to start on boot by default. To automatically start Docker and Containerd on boot for other distros, use the commands below:

sudo systemctl enable docker.service

sudo systemctl enable containerd.service

To disable this behavior, use disable instead.

sudo systemctl disable docker.service

sudo systemctl disable containerd.service

If you need to add an HTTP Proxy, set a different directory or partition for the Docker runtime files, or make other customizations, see customize your systemd Docker daemon options.

Use a different storage engine

For information about the different storage engines, see Storage drivers. The default storage engine and the list of supported storage engines depend on your host’s Linux distribution and available kernel drivers.

Configure default logging driver

Docker provides the capability to collect and view log data from all containers running on a host via a series of logging drivers. The default logging driver, json-file, writes log data to JSON-formatted files on the host filesystem. Over time, these log files expand in size, leading to potential exhaustion of disk resources.

To alleviate such issues, either configure the json-file logging driver to enable log rotation, use an alternative logging driver such as the “local” logging driver that performs log rotation by default, or use a logging driver that sends logs to a remote logging aggregator.

Configure where the Docker daemon listens for connections

By default, the Docker daemon listens for connections on a UNIX socket to accept requests from local clients. It is possible to allow Docker to accept requests from remote hosts by configuring it to listen on an IP address and port as well as the UNIX socket. For more detailed information on this configuration option take a look at “Bind Docker to another host/port or a unix socket” section of the Docker CLI Reference article.

Secure your connection

Before configuring Docker to accept connections from remote hosts it is critically important that you understand the security implications of opening docker to the network. If steps are not taken to secure the connection, it is possible for remote non-root users to gain root access on the host. For more information on how to use TLS certificates to secure this connection, check this article on how to protect the Docker daemon socket.

Configuring Docker to accept remote connections can be done with the docker.service systemd unit file for Linux distributions using systemd, such as recent versions of RedHat, CentOS, Ubuntu and SLES, or with the daemon.json file which is recommended for Linux distributions that do not use systemd.

systemd vs daemon.json

Configuring Docker to listen for connections using both the systemd unit file and the daemon.json file causes a conflict that prevents Docker from starting.

Configuring remote access with systemd unit file

Use the command sudo systemctl edit docker.service to open an override file for docker.service in a text editor.

Add or modify the following lines, substituting your own values.

[Service] ExecStart= ExecStart=/usr/bin/dockerd -H fd:// -H tcp://127.0.0.1:2375

Save the file.

Reload the systemctl configuration.

sudo systemctl daemon-reload

Restart Docker.

sudo systemctl restart docker.service

Check to see whether the change was honored by reviewing the output of netstat to confirm dockerd is listening on the configured port.

sudo netstat -lntp | grep dockerd

Configuring remote access with daemon.json

Set the hosts array in the /etc/docker/daemon.json to connect to the UNIX socket and an IP address, as follows:

{ "hosts": ["unix:///var/run/docker.sock", "tcp://127.0.0.1:2375"] }

Restart Docker.

Check to see whether the change was honored by reviewing the output of netstat to confirm dockerd is listening on the configured port.

sudo netstat -lntp | grep dockerd

Enable IPv6 on the Docker daemon

To enable IPv6 on the Docker daemon, see Enable IPv6 support.

Troubleshooting

Kernel compatibility

Docker cannot run correctly if your kernel is older than version 3.10 or if it is missing some modules. To check kernel compatibility, you can download and run the check-config.sh script.

curl https://raw.githubusercontent.com/docker/docker/master/contrib/check-config.sh > check-config.sh

bash ./check-config.sh

The script only works on Linux, not macOS.

Cannot connect to the Docker daemon

If you see an error such as the following, your Docker client may be configured to connect to a Docker daemon on a different host, and that host may not be reachable.

Cannot connect to the Docker daemon. Is 'docker daemon' running on this host?

To see which host your client is configured to connect to, check the value of the DOCKER_HOST variable in your environment.

env | grep DOCKER_HOST

If this command returns a value, the Docker client is set to connect to a Docker daemon running on that host. If it is unset, the Docker client is set to connect to the Docker daemon running on the local host. If it is set in error, use the following command to unset it:

unset DOCKER_HOST

You may need to edit your environment in files such as ~/.bashrc or ~/.profile to prevent the DOCKER_HOST variable from being set erroneously.

If DOCKER_HOST is set as intended, verify that the Docker daemon is running on the remote host and that a firewall or network outage is not preventing you from connecting.

IP forwarding problems

If you manually configure your network using systemd-network with systemd version 219 or higher, Docker containers may not be able to access your network. Beginning with systemd version 220, the forwarding setting for a given network (net.ipv4.conf.<interface>.forwarding) defaults to off. This setting prevents IP forwarding. It also conflicts with Docker’s behavior of enabling the net.ipv4.conf.all.forwarding setting within containers.

To work around this on RHEL, CentOS, or Fedora, edit the <interface>.network file in /usr/lib/systemd/network/ on your Docker host (ex: /usr/lib/systemd/network/80-container-host0.network) and add the following block within the [Network] section.

[Network] ... IPForward=kernel # OR IPForward=true

This configuration allows IP forwarding from the container as expected.

DNS resolver found in resolv.conf and containers can't use it

Linux systems which use a GUI often have a network manager running, which uses a dnsmasq instance running on a loopback address such as 127.0.0.1 or 127.0.1.1 to cache DNS requests, and adds this entry to /etc/resolv.conf. The dnsmasq service speeds up DNS look-ups and also provides DHCP services. This configuration does not work within a Docker container which has its own network namespace, because the Docker container resolves loopback addresses such as 127.0.0.1 to itself, and it is very unlikely to be running a DNS server on its own loopback address.

If Docker detects that no DNS server referenced in /etc/resolv.conf is a fully functional DNS server, the following warning occurs and Docker uses the public DNS servers provided by Google at 8.8.8.8 and 8.8.4.4 for DNS resolution.

WARNING: Local (127.0.0.1) DNS resolver found in resolv.conf and containers can't use it. Using default external servers : [8.8.8.8 8.8.4.4]

If you see this warning, first check to see if you use dnsmasq:

ps aux |grep dnsmasq

If your container needs to resolve hosts which are internal to your network, the public nameservers are not adequate. You have two choices:

You can specify a DNS server for Docker to use, or

You can disable dnsmasq in NetworkManager. If you do this, NetworkManager adds your true DNS nameserver to /etc/resolv.conf, but you lose the possible benefits of dnsmasq.

You only need to use one of these methods.

Specify DNS servers for Docker

The default location of the configuration file is /etc/docker/daemon.json. You can change the location of the configuration file using the --config-file daemon flag. The documentation below assumes the configuration file is located at /etc/docker/daemon.json.

Create or edit the Docker daemon configuration file, which defaults to /etc/docker/daemon.json file, which controls the Docker daemon configuration.

sudo vi /etc/docker/daemon.json

Add a dns key with one or more IP addresses as values. If the file has existing contents, you only need to add or edit the dns line.

{ "dns": ["8.8.8.8", "8.8.4.4"] }

If your internal DNS server cannot resolve public IP addresses, include at least one DNS server which can, so that you can connect to Docker Hub and so that your containers can resolve internet domain names.

Save and close the file.

Restart the Docker daemon.

sudo service docker restart

Verify that Docker can resolve external IP addresses by trying to pull an image:

docker pull hello-world

If necessary, verify that Docker containers can resolve an internal hostname by pinging it.

docker run --rm -it alpine ping -c4 <my_internal_host>

Disable dnsmasq

Ubuntu:

If you prefer not to change the Docker daemon’s configuration to use a specific IP address, follow these instructions to disable dnsmasq in NetworkManager.

Edit the /etc/NetworkManager/NetworkManager.conf file.

Comment out the dns=dnsmasq line by adding a # character to the beginning of the line.

# dns=dnsmasq

Save and close the file.

Restart both NetworkManager and Docker. As an alternative, you can reboot your system.

sudo systemctl restart network-manager

sudo systemctl restart docker

RHEL, CentOS, or Fedora:

To disable dnsmasq on RHEL, CentOS, or Fedora:

Disable the dnsmasq service:

sudo systemctl stop dnsmasq

sudo systemctl disable dnsmasq

Configure the DNS servers manually using the Red Hat documentation.

Allow access to the remote API through a firewall

If you run a firewall on the same host as you run Docker and you want to access the Docker Remote API from another host and remote access is enabled, you need to configure your firewall to allow incoming connections on the Docker port, which defaults to 2376 if TLS encrypted transport is enabled or 2375 otherwise.

Two common firewall daemons are UFW (Uncomplicated Firewall) (often used for Ubuntu systems) and firewalld (often used for RPM-based systems). Consult the documentation for your OS and firewall, but the following information might help you get started. These options are fairly permissive and you may want to use a different configuration that locks your system down more.

UFW: Set DEFAULT_FORWARD_POLICY="ACCEPT" in your configuration.

firewalld: Add rules similar to the following to your policy (one for incoming requests and one for outgoing requests). Be sure the interface names and chain names are correct.

<direct> [ <rule ipv="ipv6" table="filter" chain="FORWARD_direct" priority="0"> -i zt0 -j ACCEPT </rule> ] [ <rule ipv="ipv6" table="filter" chain="FORWARD_direct" priority="0"> -o zt0 -j ACCEPT </rule> ] </direct>

Your kernel does not support cgroup swap limit capabilities

On Ubuntu or Debian hosts, You may see messages similar to the following when working with an image.

WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.

This warning does not occur on RPM-based systems, which enable these capabilities by default.

If you don’t need these capabilities, you can ignore the warning. You can enable these capabilities on Ubuntu or Debian by following these instructions. Memory and swap accounting incur an overhead of about 1% of the total available memory and a 10% overall performance degradation, even if Docker is not running.

Log into the Ubuntu or Debian host as a user with sudo privileges.

Edit the /etc/default/grub file. Add or edit the GRUB_CMDLINE_LINUX line to add the following two key-value pairs:

GRUB_CMDLINE_LINUX="cgroup_enable=memory swapaccount=1"

Save and close the file.

Update GRUB.

sudo update-grub

If your GRUB configuration file has incorrect syntax, an error occurs. In this case, repeat steps 2 and 3.

The changes take effect when the system is rebooted.

Удаление старых версий

sudo apt-get remove docker docker-engine docker.io containerd runc

Установка Docker в CentOS

Инструкция

Скрипт для установки

Скрипт для установки docker и настройки работы с хостом по ssh

#!/bin/bash sudo apt-get update -y sudo apt-get upgrade -y sudo apt-get install -y ssh openssh-server sudo ufw enable sudo ufw allow 22 sudo ufw allow 29092 sudo apt-get install -y ca-certificates bzip2 tar curl git kafkacat vim sudo install -m 0755 -d /etc/apt/keyrings sudo curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc sudo chmod a+r /etc/apt/keyrings/docker.asc echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null sudo apt-get update sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin sudo groupadd docker sudo usermod -aG docker $USER newgrp docker

Похожие статьи
Установка в Windows
Установка в Linux
Engine в Centos
Desktop в Ubuntu
Docker
Linux
Ubuntu
Make

Поиск по сайту

Подпишитесь на Telegram канал @aofeed чтобы следить за выходом новых статей и обновлением старых

Перейти на канал

@aofeed

Задать вопрос в Телеграм-группе

@aofeedchat

Контакты и сотрудничество:
Рекомендую наш хостинг beget.ru
Пишите на info@urn.su если Вы:
1. Хотите написать статью для нашего сайта или перевести статью на свой родной язык.
2. Хотите разместить на сайте рекламу, подходящую по тематике.
3. Реклама на моём сайте имеет максимальный уровень цензуры. Если Вы увидели рекламный блок недопустимый для просмотра детьми школьного возраста, вызывающий шок или вводящий в заблуждение - пожалуйста свяжитесь с нами по электронной почте
4. Нашли на сайте ошибку, неточности, баг и т.д. ... .......
5. Статьи можно расшарить в соцсетях, нажав на иконку сети: